Logo Search packages:      
Sourcecode: qt4-x11 version File versions

jcdctmgr.c

/*
 * jcdctmgr.c
 *
 * Copyright (C) 1994-1996, Thomas G. Lane.
 * This file is part of the Independent JPEG Group's software.
 * For conditions of distribution and use, see the accompanying README file.
 *
 * This file contains the forward-DCT management logic.
 * This code selects a particular DCT implementation to be used,
 * and it performs related housekeeping chores including coefficient
 * quantization.
 */

#define JPEG_INTERNALS
#include "jinclude.h"
#include "jpeglib.h"
#include "jdct.h"       /* Private declarations for DCT subsystem */


/* Private subobject for this module */

typedef struct {
  struct jpeg_forward_dct pub;      /* public fields */

  /* Pointer to the DCT routine actually in use */
  forward_DCT_method_ptr do_dct;

  /* The actual post-DCT divisors --- not identical to the quant table
   * entries, because of scaling (especially for an unnormalized DCT).
   * Each table is given in normal array order.
   */
  DCTELEM * divisors[NUM_QUANT_TBLS];

#ifdef DCT_FLOAT_SUPPORTED
  /* Same as above for the floating-point case. */
  float_DCT_method_ptr do_float_dct;
  FAST_FLOAT * float_divisors[NUM_QUANT_TBLS];
#endif
} my_fdct_controller;

typedef my_fdct_controller * my_fdct_ptr;


/*
 * Initialize for a processing pass.
 * Verify that all referenced Q-tables are present, and set up
 * the divisor table for each one.
 * In the current implementation, DCT of all components is done during
 * the first pass, even if only some components will be output in the
 * first scan.  Hence all components should be examined here.
 */

METHODDEF(void)
start_pass_fdctmgr (j_compress_ptr cinfo)
{
  my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
  int ci, qtblno, i;
  jpeg_component_info *compptr;
  JQUANT_TBL * qtbl;
  DCTELEM * dtbl;

  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
       ci++, compptr++) {
    qtblno = compptr->quant_tbl_no;
    /* Make sure specified quantization table is present */
    if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS ||
      cinfo->quant_tbl_ptrs[qtblno] == NULL)
      ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno);
    qtbl = cinfo->quant_tbl_ptrs[qtblno];
    /* Compute divisors for this quant table */
    /* We may do this more than once for same table, but it's not a big deal */
    switch (cinfo->dct_method) {
#ifdef DCT_ISLOW_SUPPORTED
    case JDCT_ISLOW:
      /* For LL&M IDCT method, divisors are equal to raw quantization
       * coefficients multiplied by 8 (to counteract scaling).
       */
      if (fdct->divisors[qtblno] == NULL) {
      fdct->divisors[qtblno] = (DCTELEM *)
        (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
                              DCTSIZE2 * SIZEOF(DCTELEM));
      }
      dtbl = fdct->divisors[qtblno];
      for (i = 0; i < DCTSIZE2; i++) {
      dtbl[i] = ((DCTELEM) qtbl->quantval[i]) << 3;
      }
      break;
#endif
#ifdef DCT_IFAST_SUPPORTED
    case JDCT_IFAST:
      {
      /* For AA&N IDCT method, divisors are equal to quantization
       * coefficients scaled by scalefactor[row]*scalefactor[col], where
       *   scalefactor[0] = 1
       *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
       * We apply a further scale factor of 8.
       */
#define CONST_BITS 14
      static const INT16 aanscales[DCTSIZE2] = {
        /* precomputed values scaled up by 14 bits */
        16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
        22725, 31521, 29692, 26722, 22725, 17855, 12299,  6270,
        21407, 29692, 27969, 25172, 21407, 16819, 11585,  5906,
        19266, 26722, 25172, 22654, 19266, 15137, 10426,  5315,
        16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
        12873, 17855, 16819, 15137, 12873, 10114,  6967,  3552,
         8867, 12299, 11585, 10426,  8867,  6967,  4799,  2446,
         4520,  6270,  5906,  5315,  4520,  3552,  2446,  1247
      };
      SHIFT_TEMPS

      if (fdct->divisors[qtblno] == NULL) {
        fdct->divisors[qtblno] = (DCTELEM *)
          (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
                              DCTSIZE2 * SIZEOF(DCTELEM));
      }
      dtbl = fdct->divisors[qtblno];
      for (i = 0; i < DCTSIZE2; i++) {
        dtbl[i] = (DCTELEM)
          DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i],
                          (INT32) aanscales[i]),
                CONST_BITS-3);
      }
      }
      break;
#endif
#ifdef DCT_FLOAT_SUPPORTED
    case JDCT_FLOAT:
      {
      /* For float AA&N IDCT method, divisors are equal to quantization
       * coefficients scaled by scalefactor[row]*scalefactor[col], where
       *   scalefactor[0] = 1
       *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
       * We apply a further scale factor of 8.
       * What's actually stored is 1/divisor so that the inner loop can
       * use a multiplication rather than a division.
       */
      FAST_FLOAT * fdtbl;
      int row, col;
      static const double aanscalefactor[DCTSIZE] = {
        1.0, 1.387039845, 1.306562965, 1.175875602,
        1.0, 0.785694958, 0.541196100, 0.275899379
      };

      if (fdct->float_divisors[qtblno] == NULL) {
        fdct->float_divisors[qtblno] = (FAST_FLOAT *)
          (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
                              DCTSIZE2 * SIZEOF(FAST_FLOAT));
      }
      fdtbl = fdct->float_divisors[qtblno];
      i = 0;
      for (row = 0; row < DCTSIZE; row++) {
        for (col = 0; col < DCTSIZE; col++) {
          fdtbl[i] = (FAST_FLOAT)
            (1.0 / (((double) qtbl->quantval[i] *
                   aanscalefactor[row] * aanscalefactor[col] * 8.0)));
          i++;
        }
      }
      }
      break;
#endif
    default:
      ERREXIT(cinfo, JERR_NOT_COMPILED);
      break;
    }
  }
}


/*
 * Perform forward DCT on one or more blocks of a component.
 *
 * The input samples are taken from the sample_data[] array starting at
 * position start_row/start_col, and moving to the right for any additional
 * blocks. The quantized coefficients are returned in coef_blocks[].
 */

METHODDEF(void)
forward_DCT (j_compress_ptr cinfo, jpeg_component_info * compptr,
           JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
           JDIMENSION start_row, JDIMENSION start_col,
           JDIMENSION num_blocks)
/* This version is used for integer DCT implementations. */
{
  /* This routine is heavily used, so it's worth coding it tightly. */
  my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
  forward_DCT_method_ptr do_dct = fdct->do_dct;
  DCTELEM * divisors = fdct->divisors[compptr->quant_tbl_no];
  DCTELEM workspace[DCTSIZE2];      /* work area for FDCT subroutine */
  JDIMENSION bi;

  sample_data += start_row;   /* fold in the vertical offset once */

  for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) {
    /* Load data into workspace, applying unsigned->signed conversion */
    { register DCTELEM *workspaceptr;
      register JSAMPROW elemptr;
      register int elemr;

      workspaceptr = workspace;
      for (elemr = 0; elemr < DCTSIZE; elemr++) {
      elemptr = sample_data[elemr] + start_col;
#if DCTSIZE == 8        /* unroll the inner loop */
      *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
      *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
      *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
      *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
      *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
      *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
      *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
      *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
#else
      { register int elemc;
        for (elemc = DCTSIZE; elemc > 0; elemc--) {
          *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
        }
      }
#endif
      }
    }

    /* Perform the DCT */
    (*do_dct) (workspace);

    /* Quantize/descale the coefficients, and store into coef_blocks[] */
    { register DCTELEM temp, qval;
      register int i;
      register JCOEFPTR output_ptr = coef_blocks[bi];

      for (i = 0; i < DCTSIZE2; i++) {
      qval = divisors[i];
      temp = workspace[i];
      /* Divide the coefficient value by qval, ensuring proper rounding.
       * Since C does not specify the direction of rounding for negative
       * quotients, we have to force the dividend positive for portability.
       *
       * In most files, at least half of the output values will be zero
       * (at default quantization settings, more like three-quarters...)
       * so we should ensure that this case is fast.  On many machines,
       * a comparison is enough cheaper than a divide to make a special test
       * a win.  Since both inputs will be nonnegative, we need only test
       * for a < b to discover whether a/b is 0.
       * If your machine's division is fast enough, define FAST_DIVIDE.
       */
#ifdef FAST_DIVIDE
#define DIVIDE_BY(a,b)  a /= b
#else
#define DIVIDE_BY(a,b)  if (a >= b) a /= b; else a = 0
#endif
      if (temp < 0) {
        temp = -temp;
        temp += qval>>1;      /* for rounding */
        DIVIDE_BY(temp, qval);
        temp = -temp;
      } else {
        temp += qval>>1;      /* for rounding */
        DIVIDE_BY(temp, qval);
      }
      output_ptr[i] = (JCOEF) temp;
      }
    }
  }
}


#ifdef DCT_FLOAT_SUPPORTED

METHODDEF(void)
forward_DCT_float (j_compress_ptr cinfo, jpeg_component_info * compptr,
               JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
               JDIMENSION start_row, JDIMENSION start_col,
               JDIMENSION num_blocks)
/* This version is used for floating-point DCT implementations. */
{
  /* This routine is heavily used, so it's worth coding it tightly. */
  my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
  float_DCT_method_ptr do_dct = fdct->do_float_dct;
  FAST_FLOAT * divisors = fdct->float_divisors[compptr->quant_tbl_no];
  FAST_FLOAT workspace[DCTSIZE2]; /* work area for FDCT subroutine */
  JDIMENSION bi;

  sample_data += start_row;   /* fold in the vertical offset once */

  for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) {
    /* Load data into workspace, applying unsigned->signed conversion */
    { register FAST_FLOAT *workspaceptr;
      register JSAMPROW elemptr;
      register int elemr;

      workspaceptr = workspace;
      for (elemr = 0; elemr < DCTSIZE; elemr++) {
      elemptr = sample_data[elemr] + start_col;
#if DCTSIZE == 8        /* unroll the inner loop */
      *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
      *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
      *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
      *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
      *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
      *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
      *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
      *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
#else
      { register int elemc;
        for (elemc = DCTSIZE; elemc > 0; elemc--) {
          *workspaceptr++ = (FAST_FLOAT)
            (GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
        }
      }
#endif
      }
    }

    /* Perform the DCT */
    (*do_dct) (workspace);

    /* Quantize/descale the coefficients, and store into coef_blocks[] */
    { register FAST_FLOAT temp;
      register int i;
      register JCOEFPTR output_ptr = coef_blocks[bi];

      for (i = 0; i < DCTSIZE2; i++) {
      /* Apply the quantization and scaling factor */
      temp = workspace[i] * divisors[i];
      /* Round to nearest integer.
       * Since C does not specify the direction of rounding for negative
       * quotients, we have to force the dividend positive for portability.
       * The maximum coefficient size is +-16K (for 12-bit data), so this
       * code should work for either 16-bit or 32-bit ints.
       */
      output_ptr[i] = (JCOEF) ((int) (temp + (FAST_FLOAT) 16384.5) - 16384);
      }
    }
  }
}

#endif /* DCT_FLOAT_SUPPORTED */


/*
 * Initialize FDCT manager.
 */

GLOBAL(void)
jinit_forward_dct (j_compress_ptr cinfo)
{
  my_fdct_ptr fdct;
  int i;

  fdct = (my_fdct_ptr)
    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
                        SIZEOF(my_fdct_controller));
  cinfo->fdct = (struct jpeg_forward_dct *) fdct;
  fdct->pub.start_pass = start_pass_fdctmgr;

  switch (cinfo->dct_method) {
#ifdef DCT_ISLOW_SUPPORTED
  case JDCT_ISLOW:
    fdct->pub.forward_DCT = forward_DCT;
    fdct->do_dct = jpeg_fdct_islow;
    break;
#endif
#ifdef DCT_IFAST_SUPPORTED
  case JDCT_IFAST:
    fdct->pub.forward_DCT = forward_DCT;
    fdct->do_dct = jpeg_fdct_ifast;
    break;
#endif
#ifdef DCT_FLOAT_SUPPORTED
  case JDCT_FLOAT:
    fdct->pub.forward_DCT = forward_DCT_float;
    fdct->do_float_dct = jpeg_fdct_float;
    break;
#endif
  default:
    ERREXIT(cinfo, JERR_NOT_COMPILED);
    break;
  }

  /* Mark divisor tables unallocated */
  for (i = 0; i < NUM_QUANT_TBLS; i++) {
    fdct->divisors[i] = NULL;
#ifdef DCT_FLOAT_SUPPORTED
    fdct->float_divisors[i] = NULL;
#endif
  }
}

Generated by  Doxygen 1.6.0   Back to index